Aligning shapes
Here is a typical Visio drawing, with some shapes here and there.
To make a drawing look better, select all the shapes (in this case the four to the right), and go to menu Shape – Allign Shapes.
Now select Horizontal Allignment = left, and press ok.
Next, go to menu Shape – Distribute Shapes. Select Vertical Distribution = evenly, and press ok.
Result:
Increasing Page size
File – Page Setup, in tab “Page Size”, select Pre-defined size and set it to e.g. A3 to double the size of your “paper”.
Note: This might ruin your print, so be carefull…
